top of page

Shaft Wall and Area Separation Wall Assemblies for Multifamily and Commercial Buildings

Writer: St. Louis Drywall Pros
St. Louis Drywall Pros
Oct 26
2 min read

Updated: 1 day ago

Shaft walls and area separation walls are the two assemblies most likely to be built wrong, inspected hardest, and missed in a drywall bid. Here is how we approach them.

St. Louis Drywall Pros prices shaft wall and separation walls as commercial drywall contractors, with commercial metal stud framing in the same bid.

Shaft wall

A shaft wall encloses elevator hoistways, stairs, mechanical chases and duct shafts, built from one side because the shaft side is inaccessible once the structure is up. The standard system is 1-inch shaftliner panels set into C-H or C-T studs, with one or two layers of Type X board on the room side. Common listings are UL U415 and U469 for 1- and 2-hour ratings.

  • Confirm the rating and the UL design number on the wall type legend; the stud, shaftliner and board layers must match the listing exactly

  • Check J-runner anchorage at floor and head, and the deflection allowance at the top

  • Elevator shafts need the elevator sub's rail bracket locations before framing; coordinate early

  • Door frames in shaft walls are rated frames set by the drywall sub in most specs

Area separation wall

In townhouses and some multifamily, an area separation wall (fire wall) runs between units from foundation to roof and is designed to stay standing if the structure on one side collapses. Most are 2-hour assemblies of two 1-inch shaftliner panels in H-studs with aluminum breakaway clips to the adjacent framing.

  • Clips, not screws, tie the wall to each unit's framing so a collapse on one side releases it

  • The wall must be continuous through floors and roof, with fire-blocking and a parapet or rated roof detail

  • Penetrations are limited and must be firestopped per the listing

  • It is usually framed before adjacent wood or light-gauge framing, so it drives the schedule

What to confirm before you price it

  1. Which trade owns the shaftliner and H-stud or C-H stud system (sometimes the framer, sometimes drywall)

  2. Whether firestopping at the head and penetrations is in or out of scope

  3. Access: shaft walls built from a single side cost more per foot than standard partitions

  4. Inspection sequence: rated walls are inspected before close-up, so stagger the schedule

Send plans for a bid

St. Louis Drywall Pros bids commercial drywall, metal stud framing and acoustical ceilings across Greater St. Louis, with line-item pricing back within 48 hours. Send plans here or call 314-691-2444.


Related guides and services

This post is part of our commercial drywall resources for GCs, builders and owners in Greater St. Louis. Send plans for a bid or call 314-691-2444.

Recent Posts

See All

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
  • Facebook
  • Twitter
  • LinkedIn

At St. Louis Drywall Pros, we believe in building more than just structures; we’re committed to building trust. Our team delivers quality and reliability in every project, ensuring your vision comes to life seamlessly. With us, you can expect professionalism and dedication to excellence. Let us help you create spaces that stand the test of time.

bottom of page